Knowledge Base

• View: A View is a way to help organize workflows for easier editing.
• Add: Enables users to add Markers, Object Tracker, Model Placement, Pin, and Quiz Pin to a workflow.
• Objects: Gives users options to Duplicate, Snap, Hide, Show, and Delete.
• Select: Gives users options to Select All, Deselect All, Deselect All CAD, and Deselect All Items.
• Optimize: Gives users options to Remove Internal Parts, Remove Internal Polygons, Remove Small Parts, and Reduce Polygons.
• Camera: Gives users options to change the view to Front View, Back View, Top View, Bottom View, Right View, Left View, and Reset Camera.
• Display: Gives users options to display model as Render Model as Wires, Enable Back Face Culling, and Show CAD Statistics.
• Show hidden: Makes visible the hidden nodes, models, and model parts.
• Show connections: Shows and hides the connection lines between the pins.
• Transform gizmo: Changes the transformation gizmo settings to Auto, Local, and Global.
• Transformation gizmos: Allows mouse-controlled translation and rotation of parts and items (e.g., pins and markers) inside a 3D scene. 

Views

Views constitute a way to organize workflow content (such as pins, markers, and other user-created content) in different views. This helps to cluster workflows in different sections or topics. A Spatial Editor user can make some pins visible in one View and hide them in another View. This can be helpful when the 3D Scene of the Editor should be less cluttered with pins.

This differentiation between what's visible and what is not in one View is only relevant to the Editor. Once the workflow is uploaded to FCC, all Views are merged into one single workflow to be played in the Spatial Workplace app.

• Remove Internal Parts: Removes all internal model parts that cannot be seen from the outside. Higher resolutions will produce a more accurate result, while lower resolutions will reduce the part count. If the model will not be inspected up close, consider using low resolutions.
• Remove Internal Polygons: Removes all internal part polygons (triangles) that cannot be seen from the outside. Higher resolutions will produce a more accurate result but take more time. If the individual parts are very dense in polygons, consider using high resolutions to avoid producing cracks in the parts. Otherwise, if the parts are simple or will not be inspected up close, consider using low resolutions.
• Remove Small Parts: Removes small parts based on the given value. A part is removed if all of its dimensions (width, height, and depth) are smaller than the provided maximum dimensions.
• Reduce Polygons: Reduces the polygon (triangle) count via mesh decimation. The polygon target ratio can be used to set the desired target percentage of polygons. The error threshold can be used to stop the reduction if a certain error is reached. A higher threshold would allow more reduction in the cost of quality.

Once the user has completed mesh decimation on a model, they can assess how the visual quality of the model has been affected. If the model still meets the quality standards, they can then check the number of triangles and make a decision whether to further optimize the model or stop.

However, if the quality of the model has been significantly impacted and it no longer meets the requirements, the user can use the Back function of the editor to revert the effects of the optimization.

• Render Model as Wires: When activated, the model adopts wireframe mode, displaying only the edges of its faces. This reduces the complexity of the model.
• Enable Back Face Culling: When activated, the back of mesh faces are excluded in the visualization. When the model has been correctly constructed, it will maintain its original appearance while enhancing performance. However, if the model's faces were inaccurately modeled or inverted, it may lead to gaps or holes in the mesh.
• Show CAD Statistics: When activated, the number of parts and triangles of selected parts in the lower left corner will be displayed. This helps the user make decisions according to the computing power of the device that is intended to be used for the particular workflow.

• Auto: Shows a local gizmo if only one item or part is selected and a global gizmo if more than one is selected.
• Local: The gizmo uses the axes of the selected item or part. If more than one item or part is selected, the gizmo will show the axes of the one being selected first.
• Global: The gizmo uses the axes of the whole scene.

The scene's axes are shown in the bottom right corner of the 3D scene.